PIUSI K24-A is a digital flow meter with turbine suitable for diesel monitoring and digital management of the fluid dispensed.
PRECISION AND QUALITY
The K24-A digital diesel flow meter has been designed to monitor the flow of low-viscosity fluids. Easy to install, in-line or at the end of the dispensing pipe, K24-A has a display that can be applied in various positions to facilitate reading. The sturdy housing and sealed internal electronic board make it suitable for use in virtually any working condition.
K24-A has an aluminum body and a polypropylene turbine. The pulse type is single-channel, reed switch. The electronic board with LCD shows a partial of 5 digits from 0.1 to 99999, for a total of 6 digits 1 to 999999 Total, resettable. The display also shows the supported flow rate, up to a maximum of 120 l/min.
The K24-A diesel flow meter guarantees a metering accuracy of +/- 1%; if the metering turns out inaccurate, K24-A can always be calibrated to ensure maximum precision in its operation. With a pressure drop of < 0.03 bar at 120 l/min and a repeatability of 0.2 %, the K24 flow meter is powered by two AAA batteries. Thanks to its rotating display, K24-A can be adapted to any application and working condition.
K24-A COMPATIBLE WITH ANY BIODIESEL
Thanks to its structural features, PIUSI K24-A is suitable for ANY BIODIESEL and can be safely used to measure biodiesel of any blending and origin.
Features of the K24 Aluminium Diesel Fuel Flow Meter:
- Digital turbine fuel flow meter
- Flow rate: 7-120ltr Per Min
- Face can be rotated 4 ways for easy reading
- Bi-directional for counting either way
- Flow rate indication
- 1” F BSP Inlet / 1” M BSP Outlet
- LCD electronic display (2 x AAA batteries)
- Accuracy +/-1% after calibration
- Working temperature -10°c/+50°c
- 5 digit partial and 6 digit totaliser
- For pump and gravity systems
- Suitable for diesel