Waste Oil Transfer Pump 5:1

Waste Oil Transfer Pump 5:1

Item No: 19900

Waste oil suction system-stat. PNP 5:1-suction hose-5 m 

Technical data

Compressed air connection: male quick release adapter, for Rectus

coupling, type 26, NW 7,2 mm

Discharge: via pneumatic pump 5:1

Suction rate probe Ø 5 mm (l/min): 1,0 - 1,5

Suction rate probe Ø 6 mm (l/min): 2,0 - 2,5

Suction rate probe Ø 8 mm (l/min): 3,5 - 4,0

Connection discharge side: G 3/4" a

Media: for waste oils of hazard class A III of known

origin with flash points higher than 55°C; or not

easily inflammable liquids, not suitable for

highly inflammable liquids

Specification

 ● Stationary, for direct discharge to a collecting tank via pipework

 ● For direct extraction from motor- and commerical vehicles

 ● Pneumatic oil pump 5:1 (19 385)

 ● Male quick release adapter (20 062)

 ● With suction hose 5 m, including 2 m as visible transparent line, and hose storage

rack (19 669)

 ● Wall mounting bracket (19 521)

 ● Inline filter, G 3/4'' female, G 3/4'' female (19 761)

 ● Complete with accessories for assembly

 ● Discharge hose, 4 m

 ● Barrel screw coupling, G 2'' male

 ● Suction probes, Ø 5 / 6 / 8 mm

 ● With adapters for BMW, Mercedes, VW, Audi and Smart

 ● Suction probe holder

 ● Can be installed with vacuum switch-off unit (19 422)

Special notes

 ● Waste oil must not be stored in working areas. It is recommended, acc. to German

govt. specifications, to install an overflow protection valve if waste oil discharge shall

be effected by using a fixed pipework installation. Adhere to regional regulations and

guidelines in any case.

Packaging

Dimensions LxWxH (mm): 610 x 400 x 205

Weight (kg): 15,363

Packing unit: 1,0